Unique aerosol grease recommended for keeping Kwikee RV steps in top condition. KwikLube changes from a penetrating fluid to a tough, protective grease in minutes. The cured film is impervious to moisture and withstands temperatures in excess of 400-degrees F (204C). Additives prevent rust and reduce wear.

The perfect accessory for any Generation 3 Triple or Quad SolidStep®, the Entry Assist Handrail provides added support when entering and exiting the RV. Features: Locking pins allow for 5-inch adjustment to accommodate entry door widths up to 36 inches, Powder coat finish stands up to the elements, Easy DIY installation, Mounting brackets and installation hardware included. Only available for Gen 3 Triple and Quad Solid Steps.

Easily mounted to your step. The two-color diamond plate pattern increases visibility. The soft rubber diamonds provide better traction. Multi-level height helps kick off sand and dirt. Includes fasteners. Dimensions: 22" X 7-3/4".

Improves footing on steps when wet. Each strip has been pre-cut to fit most RV step applications.

Enhance the safety and convenience of your RV steps with the Dream Lighting LED RV Courtesy Motion Sensor Step Light. Features: The 2.1" LED step light is equipped with 3 white diodes, delivering bright and clear light at 3500K, ideal for illuminating steps and entryways. The integrated infrared sensor detects motion, automatically activating the light when you approach. This light is surface mounted with a snap-on black shell, ensuring easy installation and a secure fit. IP55 protection rating that makes the light water and dustproof. The materials are also UV-resistant, ensuring long-lasting performance. Operating at 13.5V and 0.2W with a current draw of just 15mA, this light provides a brightness of 28 lumens, making it both effective and power-efficient.

For safer footing everywhere...steps, ladders, ramps, farm equipment, decks, basement stairs,"

Makes your step treads visible in low light conditions, measures 6" x 21".

Safety step glow strips, 2PK, 1" x 15.5" long.

RV Step Rug Replacement Springs.

Extends #RHS2 beyond your tailgate in the down position. Three adjustable lengths when used with #RHS2 stair: 19-1/2", 22-1/2" and 25-1/2" (back of top step to hitch pin hole). Weight capacity 250 lb .

Take the bounce out of your RV or trailer's entrance step with the Solid Stance Step Stabilizer Kit by Lippert™. Compatible with all Lippert™ double and triple Steel Radius Steps as well as our double and triple Alumi-Tread® Hybrid Aluminum steps, plus a wide-variety of non-Lippert assemblies. Features: Dual, individually adjustable legs with four adjustment angles that can adapt to various terrain. Adjustable height range of 5" - 14". Permanently attaches to your step, no need to dismantle after use.

Illuminate your path with bright LED step lights that attach to the bottom of the StepAbove RV Entry Step and the Lippert® Solid Step. Simple magnetic attachment feature allows each light to be used as a standalone flashlight. Features: Magnetic attachment for easy removal, Battery operated (batteries not included), Daylight sensor extends life of batteries, On, Off, and Auto options for your convenience. Includes: 2 Lights, 2 Aluminum Brackets, Mounting Hardware.

Create extra stability when lowering the StepAbove by adding a Grab Handle. Features: Provides additional ease when lowering, Attaches underneath step tread, Simple bolt-on installation. Includes mounting hardware.

Makes RV entry effortless, no more step stools needed! Features: Adjustable for 8" and 9" rises, Attaches to any Gen 2 StepAbove® step, Closes the gap when when the first step is too tall, Easy to attach and remove, Comes with longer legs to accommodate height difference.

Improves footing on steps & ladders. Can be cut to shape, adheres to any clean, dry surface. Durable in wet or dry conditions.

Improves footing on steps & ladders. Can be cut to shape, adheres to any clean, dry surface. Durable in wet or dry conditions.

Unique self-leveling design, anti-tip base prevents tipping. Non-slip rubber leg tips and gripper, rugged all-aluminum welded construction that will not

Get added stability with the StepAbove™ optional handrail. Fits: 1st Generation StepAbove Entry Steps.

Get added stability with the StepAbove™ optional handrail. Fits: 1st Generation StepAbove Entry Steps.

Plastic end caps for 1" square tubing.

Get added stability with the StepAbove™ optional handrail. Fits: 2nd Generation StepAbove Entry Steps.

Add a lockable feature to the Strut Assist StepAbove with a Step Latch. Features: Provides additional security while stored in doorway, Easy-to-use pull latch mechanism, Simple bolt-on installation. NOTE: The latch fits on the left-side only of steps. The latch assembly doesn't work on the rights side of steps due to the angle of the latch. Includes mounting hardware.

The Lippert Solid Step RV shoe storage organizer gives you a convenient place to stash your shoes right outside your RV door. Designed to keep footwear off the ground and out of the moisture, this mesh storage solution helps reduce clutter and prevents soggy, muddy messes from being tracked inside. Compatible with all generations of Lippert's triple and quad Solid Step assemblies, this storage solution installs in minutes without tools. Once in place, it collapses automatically when the shoes are removed and steps are folded up. It also includes extra clips for peace of mind. Dimensions: 20.5" L X 12.6" W X 1.8"H. NOTE: Not compatible with double step assemblies.

Keep dirt and debris out of your RV with the innovative StepBrush. Designed to mount securely underneath your StepAbove entry steps, this brush is the perfect solution for maintaining a cleaner RV. Features: Dual-Purpose Design, Clean shoes or sweep your steps. Quick Removal, Effortlessly detaches for standalone use. Durable Construction, Built for the outdoors and daily use. Compact Size, Blends seamlessly with your RV steps. NOTE: The Step Brush is only compatible with Gen 2 steps. Mounting hardware included. Dimensions: 2.375" W X 3" H X 17.375" L.

Multi-Function Corner Standoff and Tool tray works for all stock. Use on inside corners, outside corners, flat walls, and poles. Durable construction with Anti-Slip surfaces.

Improves footing on steps & ladders. Can be cut to shape, adheres to any clean, dry surface. Durable in wet or dry conditions.

Improves footing on steps when wet. Each strip has been pre-cut to fit most RV step applications.

The Solid Step Lift Assist Kit integrates a gas strut into the mechanics of the step, removing virtually all of the weight from the step during deployment and while storing. Once installed, the Lift Assist Kit allows the Solid Step to be held up with minimal physical exertion, just one finger can do the trick! The Lift Assist Kit comes in two sizes, the narrow kit that fits 25"-28.9" Solid Step models, and the wide kit that fits 29"-32" Solid Step Models.

The Solid Step Lift Assist Kit integrates a gas strut into the mechanics of the step, removing virtually all of the weight from the step during deployment and while storing. Once installed, the Lift Assist Kit allows the Solid Step to be held up with minimal physical exertion, just one finger can do the trick! The Lift Assist Kit comes in two sizes, the narrow kit that fits 25"-28.9" Solid Step models, and the wide kit that fits 29"-32" Solid Step Models.

The DirtDestroyer is a specially designed shoe cleaning attachment that quickly attaches to your already existing trailer's folding steps to keep the inside of your RV clean. It allows you to leave the dirt outside your RV and keep your interior clean for the duration of your camping vacation. Current applications for the universal DirtDestroyer include: Hickory RV Steps, Lippert RV Steps, Kwikee Power Steps, Tread Lite Power Steps, Flexco RV Steps.

Get added stability with the StepAbove™ optional handrail. Fits: 2nd Generation StepAbove Entry Steps.

The Lippert motion-activated RV step light illuminates your outdoor living space, providing safety for you and your family as you enter and exit your rig, walk around the campsite or any other place you need motion-activated light around your home, boat or vehicle. Motion activated light has two powerful magnets integrated into the back of the light for simple installation on magnetic surfaces. Included is an adhesive-backed metal plate for attachment on non-magnetic surfaces. Features: Motion sensor activates lights for 15 seconds when movement is detected Made from heavy-duty injection molded plastic, Powered by six AA batteries (not included). Dimensions: 6.75" L X 1.75" W X 1.75" H.

All of Our Safety Step models are built to last, but every now and then extensive wear and tear may call for a backup. Our customized replacement leg tips for our folding models are built with the same strength as our safety steps. This replacement set of leg tips is designed for Safety Step Models F-08C, S-07C, & XL-08C. (1.0" leg-end width).

Makes RV entry effortless, no more step stools needed! Features: Adjustable for 8" and 9" rises, Attaches to any Gen 2 StepAbove® step, Closes the gap when when the first step is too tall, Easy to attach and remove, Comes with longer legs to accommodate height difference.